Troubleshooting Tips for New Monitors

You are encouraged to make links to this article from your website and tell your friends
Here are some basic troubleshooting tips for new monitors:

1. The picture does not appear
* Check to make sure the signal cable is firmly connected in the socket.
* Check to see if the computer system’s power is ON
* Check that the Brightness Control is at the appropriate position, not at the minimum.
2. The Screen is not synchronized.
* Check to make sure the signal cable is firmly connected in the socket.
* Check that the output level matches the input level of your computer.
* Make sure that the signal timing of the computer system is within the specification of the monitor.
3. The position of the screen is not in the center.
* Adjust the H-Size, H-Phase or V-Size, V-Center controls.
* Check if the signal timing of the computer system is within the specification of the monitor.
4. The screen is too bright or too dark.
* Check if the Brightness or contrast control is at the appropriate position, not at the maximum or minimum.
* Check if the specified voltage is applied.
* Check if the signal timing of the computer system is within the specification of the monitor.
* Especially, check the horizontal frequency.
5. The screen is shaking.
* Move all objects that emit a magnetic field, such as a motor or transformer, away from the monitor.
* Check if the specified voltage is applied.
* Check if the signal timing of the computer system is within the specification of the monitor. google.com, pub-8056491207757224, DIRECT, f08c47fec0942fa0 google.com, pub-8056491207757224, DIRECT, f08c47fec0942fa0